Kitchen Cabinet Installation Guide Chapter 3

Learn to install base cabinets professionally with this step-by-step video.

Lay out the base cabinets according to your floor plan. Each cabinet should align with at least one wall stud. Measure the distance using the front width of the cabinet, since the front face frame is wider than the back. Remove doors, drawers, roll-out trays, shelves and accessories as necessary to provide access for installation.

Start with the corner cabinet. Refer to your design layout to determine what base corner cabinet to start with. Place it on the floor where it will be installed. If your design includes a base easy-reach or base easy-reach lazy Susan, as the kitchen in the video does, measure from the corner to the first wall stud and transfer this measurement, minus 1 inch, to the back of the base cabinet. Repeat for the next stud location on each cabinet.

Mark a 2 inches down from the top of the cabinet back at each stud point. Drill through the cabinet back at the intersections using a 3/32″ drill bit. Repeat for the adjacent corner back panel.

If your design includes a blind base cabinet instead of a base easy-reach corner cabinet, consult your design to determine the distance the cabinet needs to be installed from the wall corner. A blind wall cabinet is used for smaller spaces and does not take up the entire space in the corner.

Move the base cabinet into place and check for level and plumb to follow the floor high-point level line and shim where necessary. Measure your wall distance using the cabinet front-frame width and not the back width of the cabinet. Fasten the cabinet to the wall with #8 x 2-1/2 inch pan head trim screws, but do not fully tighten.

Place the next cabinet on the floor where it will be installed. Mark and pre-drill screw holes at studs. Align the cabinet face frames, leveling and shimming where necessary, and clamp face frames together. Drill 3/32 inch pilot holes inside the face frame. Countersink the drill holes.

Coat screw threads with bees wax to limit resistance and prevent the face frames from cracking. Fasten neighboring cabinets. Continue around the room until all base cabinets have been installed. Return to each cabinet for one last check of level and plumb, and then tighten all screws.

You may need to install a filler between your end cabinet and the wall or between cabinets.

Hold the filler in place where it will be installed, turn it over, and mark the top and bottom trim widths. Use a straight edge to connect the marks. Once cut, install the filler as if you were fastening two face frames together.

Install all shelves, drawers, roll-out trays, accessories and doors before proceeding to the tall cabinet installation.

Kitchen Cabinet Installation Guide Chapter 2

Step-by-step guide for professional installation of wall cabinets.

Locate and mark studs on all cabinet walls. Use your floor plan to identify where each wall cabinet will be installed. Measure the front frame-width of the cabinet, since the back is narrower. Try to ensure each cabinet will attach to at least one wall stud.

Install the corner cabinet first. This is the keystone for your entire cabinet installation. The kitchen in the video does not have a corner wall cabinet, but the following illustrations detail installation of different types of corner cabinets.

First, mark the backs of the wall cabinets with stud locations: Measure from the corner to the first stud and transfer this measurement, minus 1 inch, to one side of the cabinet back.

Repeat for the next stud location. Now mark points on the stud line 2 inches from the top and bottom of the cabinet. Repeat for the second side of the cabinet back. If your kitchen includes a blind wall cabinet instead of a wall corner cabinet, consult your design to determine the distance the cabinet is to be installed from the wall corner.

At marked points, drill holes using a 3/32 inch drill bit. Rest the cabinet on the ledger rail and fasten to the wall with a number 8 x 2-1/2 inch pan head trim screw, but don’t fully tighten. Check for level and shim where necessary.

Place the next cabinet below where it will be installed and repeat all measuring and pre-drilling. Rest the cabinet on the ledger rail and fasten to the wall but again, don’t fully tighten the screws. Shim to level where necessary.

Securing face frames to each other. Carefully align the face frames of the adjacent cabinets using a “C”-clamp or a “Quick-Grip” type tool. Then drill 3/32 inch pilot holes in three places on the hinge side of the interior of the cabinet face frame. Countersink the screw holes. Coat screw threads with bees wax to limit the hardwood face frames’ resistance to screws. Hide two screws behind hinge plates.

Continue around the room until all wall cabinets have been installed. Return to each cabinet for one last check of level and plumb and then tighten all the screws.

Wall Filler Installation

Use the same method to attach fillers as you did for face frames. You may need to install a filler between cabinets or between a cabinet and a wall. Hold the filler in place where it will be installed. On the back of the filler, mark top and bottom trim widths.

Use a straight edge to connect the marks and create the cut line. Once cut, fasten the filler to adjacent face frame(s).

Installing loose finish end panels. Your design drawing installation notes will identify cabinets to receive end panels, and of course, your designer is always available to answer any questions.

Gently sand the back of the end panel to rough up the surface for best adhesion. Wipe the surface clean after sanding.

Position the end panel over the side of the cabinet to dry fit. If the cabinet is shorter than the end panel, scribe a pencil line on the back of the panel to determine the trim line. If the end panel is being applied to a base or tall cabinet, also scribe a pencil line to determine a toe-kick-notch cut line. Cut the height and toe-kick notch if applicable, using a table saw, circular saw or jig saw. We recommend using a fine-cut/melamine saw blade and cutting finished side face down to prevent. You may also need to trim the wall side of the panel if the wall is not straight. To help prevent chipping by scoring both the face and backside of each panel with a utility knife at cut lines before sawing.

Apply panels with contact cement or panel adhesive, available at most home center or hardware stores. Apply adhesive per manufacturer’s instructions. Some adhesives will bond immediately while others may require brad nails to secure the panel while the adhesive bonds.

Install wall cabinet shelves and doors before installing base cabinets. You can now remove the temporary ledger rails.

Bathroom Remodeling – Needs and Wants

Many individuals imagine someday having a beautiful, elegant restroom that is absolutely a soothing escape from day-to-day life. While the ideal decoration is a crucial component to making this dream a reality, so are the products and fixtures decided on alongside the style. Also if you don’t have a big, spacious bathroom, you can still make the most out of the room you do have by picking the most effective items to match your wants and does need. Certain fixtures/products are available for usage in any kind of dimension bathroom and can supply contemporary appearance, progressed capability, and eco-friendly functions. When it involves deciding on products for your bathroom, consider exactly what choices are available and consistently speak with a professional plumber which can finish correct installments of sinks, faucets, and showerheads.

What do you need to remodel your bathroom?

The best ways to Choose Products for your New Bathroom: Sinks, Faucets, and Showerheads

Make Home better, Switch to Fiberglass

Residents have lots of selections when it comes to the right sort of glass and it can be tough to know which kind is most ideal. Whether you’re interested in wood, vinyl or fiberglass glass, take a couple of minutes to discover regarding the benefits of each, especially fiberglass home windows.

Want A Low Upkeep Choice?

If the thought of investing a great deal of time resealing and evaluating each and every glass at home loads you with fear, fiberglass home windows may be the very best choice for you. This product is created to never fracture, split or warp. Due to the fact that they’re so durable, they won’t weaken or become fragile, also throughout the most popular summer season and the coldest winter ones.

House owners that wish to transform up the appearance of their house without a replacement could simply paint the structures. Numerous property owners locate that they like the all-natural timber finish so a lot that they never ever even believe about repainting them.

Fiberglass Windows Aid Remodeled Home owners Go Eco-friendly

If you’re making an effort to aid the atmosphere, you probably know all about Electricity Star home appliances, tankless water heaters and various other points that you can contribute to your house in an initiative to go green. Nevertheless, fiberglass home windows must likewise be included in your listing.

They are constructed of silica sand, a normally taking place product that’s abundantly located throughout the world. Furthermore, virtually 40 % of the materials that make up a window originates from recycled sources. A glass made out of fiberglass will not release dangerous fumes in to the environment and will extinguish itself if it ever catches on fire.

Lastly, this product increases and acquires up to 800 % much less compared to vinyl equivalents. This aids keep cozy air inside throughout the cold cold weather and amazing air inside throughout the steamy summer months. This can save house owners some significant cash on their energy costs.

Exactly what Else Should Homeowners Take into consideration?

Fiberglass glass are a superb selection, home owners do need to think about various other aspects. They do have to be custom-made bought, meanings that that it could take a while for them ahead in. If you’re intending on a window replacement in the near future, understand that you have to plan for manufacturing time. Furthermore, because they’re so durable and custom-made constructed, they do amount to more than timber or vinyl.

Ways to Find The Right Company To Change Your Home windows

When you make your option, you require the appropriate company to assist with your glass substitute. Look for one with experienced service providers that could stroll you with the whole procedure. Ensure to search for testimonials of the firm on trustworthy service provider websites such as Angie’s Checklist and ask family and friends for their suggestions. The right organisation will make your home window replacement a wind (literally!) and is an important part of your window substitute.

Save Money With your Home Contractor

We have actually all listened to those horror stories of customers getting burned by a less than ethical contractor. Many of those stories include much more than second-rate job that has to be redone. Sometimes hundreds of dollars could be scammed if the property owner hasn’t already done his (or her) due diligence to ensure he’s worked with a specialist that is respected and trustworthy.

Ways to save money in hiring a contractor

Acquire references

Among the very best methods to locate a top quality professional is to obtain a reference from an individual you understand which has had actually comparable job performed in the past. Request referrals from good friends, relatives, next-door neighbors and co-workers. You might also make use of social networking sites such as publishing on Facebook to reach a bigger circle of pals and acquaintances.

If you can not discover any person, an additional option is to get in touch with a local business that often uses dependable professionals like a lumber supply store or even a building assessor.


Consult the Better Company Agency to validate that any sort of possible company or specialist is in good standing. As updates are made frequently, it might be a great idea to examine the website daily, at least until you make a company decision or sign an agreement.

Search online

While beginning with the BBB is consistently a good suggestion, expand your search to consist of assessment websites like Howl and Angie’s Listing. There is no such point as “excessive research” if you intend to prevent getting duped. A brand-new alternative to standard review websites, are firms that supply to veterinarian businesses before listing them on their web site The specialist’s certifications and licenses are inspected along with their public obligation insurance, company details and additional, needing a rigorous confirmation and approval process which can help save consumers’ time and stress.

Verify insurance and licensing

If you don’t utilize a third party to verify a service provider’s insurance coverage and licensing, this action is essential. Get in touch with a customer security firm or local structure division to discover the licensing needs in your area, and afterwards ask to see the specialist’s license and ensure that it is current.

You ought to additionally find out if the company is insured against claims covering worker’s settlement, residential property damages and individual obligation. Verify the details straight with their insurance organisation preferably.
Access the very least 3 quotes

Attempt to get at the very least 3 estimates from prospective service providers based upon the exact same materials, labor, time and specs of the job. A professional who provides a remarkably low proposal is supplying you with an excellent hint that he’s probably reducing expenses by using affordable materials or less compared to certified labor, which usually results in a disastrous end instead than an excellent bargain.

Acquire recommendations – and inspect them

The specialist ought to have the ability to give you with the names and contact number of at the very least 3 consumers which have tasks that resemble yours. Ideally, the tasks ought to have been finished one to 3 years ago – recent adequate for the house owner to bear in mind the encounter, however not so recent that there hasn’t already sufficed time for something to bad happen.

Red flags

Expect warnings along with an extremely low bid such as requesting for a large quantity of cash in advance, requiring to be paid just in cash, professionals which don’t have a bodily company address, and specialists which concern your door providing “unique” discounts.

House Cleaning Tips and Tricks

If you are like me, house cleaning is a job that gets constantly put off. I just don’t feel like there is enough time for me to mop, sweep, dust, scrub, scrape, and polish. Thankfully, there are people out there who have been doing this kind of thing for years. These professionals know the ins and outs of the job, and they will tell us the secrets to prevent it from taking over our lives.

Okay, let’s start in the kitchen. When attempting to scrub and sanitize this massive filth and germ attractor, be sure to start on the right side of the stove and work clockwise around the room. This will leave the stove, typically the dirtiest part of the kitchen, for the last task. By doing this, you are reducing the amount of dirt and grime you spread to other parts of the kitchen during your cleaning process.

While in the kitchen, make sure that you disinfect the sink when scrubbing it. Disinfecting and sanitizing this area regularly is very important because it has been proven that the kitchen sink actually contains more germs than the toilet bowl. Now moving on to the dishwasher, I find myself rationalizing that I can skip this machine because it’s getting cleaned every time I use it. Well, I could not be further from the truth. The dishwasher is home to caked on grime and many nasty germs like e-coli. Because of this, it needs to be wiped out regularly with a combination of baking soda and bleach. This combination will kill those germs while removing old, crusty food.

To avoid the manual labor of scrubbing the bottom of your oven, a great tool to use is an oven liner. This great invention can be wiped with a towel and placed in the dishwasher to be cleaned and used over and over. It will prevent the black soot that is so prevalent in ovens from coating the bottom of yours.

A great time saver when dealing with house cleaning is to clean as you go. A great example of this can be illustrated in the kitchen. As you prepare a meal, fill the sink with hot, soapy water. Place the preparation dishes in the water to soak as you enjoy the meal, and then do the same with the dinner dishes. By the time dessert is over, all of the dishes can be transported from the sink to the dishwasher with little or no scrubbing. Along these same lines, be sure to wipe up any spills as they happen. They will be much easier to eliminate this way, than if you wait until they harden.

Another time saver when it comes to house cleaning is to simply wash your shower curtain liner with a few towels in the laundry. This method will be much faster than trying to scrub the mildew and grime off by hand, and it is not nearly as disgusting either. Also, to easily tame the toilet, simply pour some tang in the bowl and let it stand for a few minutes. The citric acid works as a scrubber to eliminate all of those nasty stains.

 Article Source:

Building a House Extension

Building a house extension is often an affordable alternative to selling your existing home and buying a larger one. Unlike selling and buying a new home, home extensions don’t require moving costs, real estate transactions costs, stamp taxes, and utility disconnect and hook up costs. In addition, when financing is not required for the house addition, no mortgage closing costs are incurred.

Common house additions include family room additions, bedroom additions, sunrooms, and kitchen bump-outs. Besides the cost savings, house extensions also enable families to not have to uproot and move into new towns or school districts. This often is the main reason why people choose building a home addition over moving to a new house. Many homeowners like where they live, but they simply need more living space for their growing families.

When considering a home addition, however, it is important to realize it is a major home construction project. Besides a major expense, it requires significant planning and project management. Undertaking a project of this complexity on your own is not for the faint of heart or inflexible homeowner. A house extension will interrupt your family’s home life for 2 to 4 months, on average. Dirt, dust, interruptions, last minute decisions, and lack of privacy will be common issues that you will need to deal with, and accept, if you move forward with a home addition project. House extensions, in some cases, can even force the family to move out of the home for a couple of months when the extension work includes renovation of the existing home interior.

Successful house extensions always begin with a well thought out and documented set of blueprints and plans. In addition, hiring the right general contractor, or subcontractors, if you plan to be your own general contractor, is absolutely imperative. Only through a formal home construction bidding process and through extensive background checks can you ensure that you hire the right contractor for your home extension project. An architect can help in both of these issues. Besides developing a formal set of home addition plans, and architect can also help to find and hire a reputable general contractor. In addition, architects can also act as oversight project managers to make sure the house extension is built to both building codes and to specs.

House extension costs per square foot can vary widely, however they are typically higher than the cost of new home construction. This is due to the fact that retrofitting a room addition into an existing home requires additional labor, compared to green field new home construction. This said, all of the other costs associated with selling and buying a larger home dwarf the cost per square foot premium associated with house extensions.

So if you are considering a house addition, visit an architect and your local building inspector to see what your options are for extending your home outwards, and possibly even upwards. Then move forward with a plan that includes developing blueprints, locating a general contractor and obtaining financing if necessary. Then get prepared for an exciting and occasionally bumpy ride for the next several months. In the end, and with a little luck, you’ll be thrilled with your new finished living space and house extension.

Article Source:

Important People for House Building

For those who are engineers, architects or interior designers, house building is definitely a fun process for them. They would understand the process and how it is done. They are the ones who have control over the whole building. During this process, there would be so many people who are involved. Of course, the owner of the house would be one of them but there are other people who are concerned too. They all have their own duties and responsibilities with the house. They may work separately in their areas but they work together to build a perfect house for the owner.

Here are the important and needed people who are involved in the house building and their responsibilities:

• Engineer: Provides the structure design of the whole house; in-charge of providing the structure from the floors to the roof; works together with a work supervisor and a site supervisor

• Architect: the most important person in house building; gets the ideas from the clients and they are the ones who puts it into paper; are knowledgeable with guidelines and legal requirements that are related to your building so they are hired to avoid any legal issues; could pick out the workers for the area

• Contractor: they are the ones who watches all the workers and labourers at the site; supervises their work to ensure that they are doing their job well

• Mason: in charge of the construction of the whole house; in charge of building walls and other construction

• Carpenters and Painters: One of the most needed people during the building process; they are the ones who provides the doors, windows, cabinets and other woodworks that you need; paints walls, ceilings, etc

• Electrician and Plumber: Every house must need a good source of water and electricity so they are the ones who would fix the lines and pipes to have good water supply and electricity connection

All of these people are needed during the house building. So there are really a lot of people when you go to the site. They all must do a good job to be able to build a strong and nice house. They all must agree on things and cooperate with each other so the house would look nice. All of them have one goal. Their goal is to be able to build a home where a person or a family would be able to live comfortably.

Article Source:

House Plan – It’s Importance to Building a New House

A house plan is a must for building a home before its construction begins. It is helpful for planning home space, estimating the cost of the expenses, allotting the budget, knowing the deadline of the construction and setting the schedule of meeting with the architect, designer or home builder. So if you are planning to build a new house without it, then it’s for sure, the house will have a low quality structure and design and also cost you more money in the long run because of the mistakes that may arise once the construction starts.

When making a house plan, there are many important points to consider. One is the location where the house will be built. It is usually best to buy a land before you start to make a house plan. Knowing the area and the type of terrain you chose to build on is helpful to properly plan the house and maximize the space of the land area. It’s also necessary to consider the lifestyle and the size of the family to see how many number of rooms and bathrooms needed, what kind of style and design of the living room, kitchen and dining room and how much space is needed for each of them. You also need to consider the number of your vehicles for you to plan well how much big your garage should be. It’s best to discuss these details with your family to make sure that your new house will meet your standard of living.

There are lots of ways to obtain a desired house plan for your new house. You can search it through the internet and choose from various websites that feature display homes with their corresponding house design plans. Searching for some examples of house plans can be an efficient, smart and fast way of getting and refining ideas in planning and making your own one.

Certainly, a house plan is necessary in building a house. It helps you visualize how the house should look like when it’s fully finished. Seeing the overall layout and house design will make you sure that the architect has met your exact requirements on its structure, features, designs, styles and all other important details in building your house. It also gives the home builder a good overview on its house design and guides him all the way through the entire project. So it’s imperative to not be rush in making a house plan to ensure that all your requirements are met and to avoid mistakes. Ideally, preparing a house plan should take several weeks and need a lot of discussion with your architect or home builder. Doing this gives you a sense that your hew house is built safe and also assures you its quality and excellence.

Article Source:

A Well lit and Secured Home

Most of individuals will install a defense alarm system to inform of burglars, but those only work after the crooks have actually entered into your house. The best way to do this is to make sure that the beyond your residence is well lit.

This is the goal of security home illumination, and there are various options from which you can pick in order to do this. Residential Landscape Lighting and Format has every little thing that you require to position your very own home security lighting installations. We furthermore have conveniently available specialists to aid you every step of the method in your journey to keep your castle safeguard from trespassers.

A well-lit house is a secured home

Perhaps the simplest of security residence light are movement set off flood lights. An amateur should have the capacity to set up any one of our minimized voltage flood lights; nonetheless if you are unpredictable of your technical proficiency by any methods, or you desire to put in higher voltage flood lights, you ought to take in to consideration employing an expert electric contractor.

Some people do not like the continuous glare of flood lights, yet they would absolutely still such as the safety that such residence security lighting products. It will merely show up that the light is continually lit to you, yet it is this flickering activity and the fact that these lights take a couple of minutes to heat up before beginning are why H.I.D. flood lights could not be used with movement detectors. When the interior lights come on, for extra home protection lights you could additionally put occupancy controls inside the residence to control.